From paper to project
Print at 100 % and check that the calibration square measures 20 mm.
Cut out the four pieces along the solid edge, keeping the inner decoration intact.
Write your message before punching or adding string.
Round the corners with scissors so they do not catch on pages.
If adding string, punch centrally 8 mm below the top edge.
Store the remaining pieces beneath a sheet to keep them flat.
Check it with an example
Four bookmarks per sheet: for 18 gifts print five sheets and keep two spares. Test one page before feeding a batch of card through your printer.
If it does not turn out as expected
Lamination is optional and increases thickness. Avoid bulky tassels if the bookmark will stay inside a closed book.
Your template, ready to print
Original design. Match your printer’s paper size and keep the scale at 100 %.
Solid line: cut. Dashed line: fold. Calibration square: 20 × 20 mm. Personal and classroom use; do not resell the file.
Where this idea comes from
This project revisits a Dulzura de Papel topic with instructions and original graphics developed for this version. Marcadores de Libros (Imprimibles gratis).
